Martin Professional MAC 250 Entour, User Manual

Page: 20 / 56

20 MAC 250 Krypton/Entour
7. Insert the gobo holder bac7 in the gobo wheel using a small flathead screwdriver to lift the retaining
blades.
8. Replace the cover before applying power.
Fixed gobos (MAC 250 Entour only)
The =!C 250 4ntour provides 10 fixed gobo positions (plus open).
R E P L A C I N G A F I X E D G O B O
Danger! Intense heat. Avoid contact by persons and materials. The exterior of the fixture can get
very hot - up to 120C C (24GC F). Disconnect the fixture from AC power and allow it to cool
for at least 45 minutes before handling.
Do not removing covers while the fixture is powered on as this exposes dangerous live
electrical circuits, hot surfaces, and a lamp under high pressure.
1. Disconnect the fixture from !C power and allow it to cool.
1
2
3
4
5
6
7
8
9
10

0osition Lobo
1 1riental fire
2 _iggles
3 Qear drops
4 brush stro7es
5 dashes
6 Splash
7 CraLed
8 Dibs
9 Sharp brea7up (large)
10 oedsKaKleaping
Table 4: Fixed gobos