Martin Professional MAC 250 Entour, User Manual

Page: 7 / 56

Setup 7
S
ETUP
Unpacking
The =!C 250 Arypton/4ntour comes with:
D =SD 250/2 lamp (factory installed)
D 3Kmeter, 3Kwire I4C power cable
D user manual
D 1/4Kturn clamp mounting brac7et
D 5Kmeter, 3Kpin shielded cdR control cable
The =!C 250 4ntour also comes with an extra 14O lens.
The pac7ing material or flightcase is carefully designed to protect the fixture during shipment K always use it
to transport the fixture.
_hen installing the =!C 250 4ntour model you may find it useful to loc7 the
head in place using the tilt loc7s.
AC power
Warning! For protection from electric shock, the fixture must be grounded
(earthed). The power supply shall have overload and
ground-fault protection.
Important! Verify that power supply settings match the local AC supply
before use.
The =!C 250 Arypton/4ntour is factory configured for 230 a / 50 eL operation. If your !C power supply is
different, the fixture must be configured for the local voltage and freYuency. !lways use the settings that are
closest to your !C supply.
C O N F I G U R I N G F O R L O C A L A C P O W E R
1. Disconnect the fixture from power.
50
60
120
100
210
230
250
Figure 1: Power supply settings
Voltage
Frequency