Martela Oyj
Takkatie 1
FI-00371 Helsinki
[email protected]
2.2 System procedure
WARNING
Risk of electrical shock:
The main power cord must be unplugged during the setup.
To setup the table:
1. Connect the control box to the motor/motor house.
2. Connect the handset to a 3-pin control box.
3. Connect the power cable to control box.
4. Connect the power cable to power source.
5. Screw the tabletop on.
6. Reset the table (see instruction in 3.2).
7. The table is ready for use.
Cable
Handset
Power cord
Control box
