Martela Oyj
Takkatie 1
FI-00371 Helsinki
[email protected]
2. This table is not intended for use by children or individuals with a physical or other impairment,
which may affect the ability to safely operate the equipment.
3. Use this table only for its intended use as described in these instructions. Do not use attachments
not recommended by the manufacturer.
4. Never operate this table if it has a damaged cord or plug, if it is not working properly, if it has been
dropped or damaged or if it has exposed to water. In such event, please return the table to a ser-
vice center for examination and repair.
5. Never use this table without making sure that the cord can freely move in the whole height ad-
justment area.
6. Keep the cord away from heated surfaces.
7. Do not use the table outdoors.
8. Do not operate the table in a potentially explosive atmosphere.
9. Do not use the hand switch when removing the plug from outlet.
WARNING
Risk of Electric Shock:
1. Connect this table to a proper outlet only. When loading items on the table, make sure to place
them away from the edges and to place the heaviest items at the bottom to help prevent the pos-
sibility of the furnishing tipping over.
WARNING
Risk of Injury to Persons:
1. Do not use this table to lift people and do not use this table to lift heavy parts or as a platform for
storage.
2. Maximum intended load is 120 kg (265 pounds) uniformly distributed, including the tabletop.
Ensure the loading on each column is less than 60 kg. Otherwise, it might cause permanent dam-
age to the column(s) during operation.
3. Always make sure all screws are tightened before use of the frame for desk, also after a period of
use
.
4. When the motor cable is connected to the control box, the columns can maintain an adequate
locking force up to 120 kg load on the tabletop. However, when the cable is damaged or is dis-
connected from the control box, it will cause the desk sliding to the bottom within hours, if the load
on either columns are larger than 60 kg.
DANGER
Risk of electric shock, injury, or death:
1. Improper usage, abuse or misuse of the power supply, handset, motors and other electrical com-
ponents may result in an electrical shock injury or possible death.
2. Do not open the power supply unit or handset under any circumstances. The power supply and
handset contain no serviceable parts.
3. Do not modify or make any changes to the power supply, handset or other electrical devices.
4. During installation, repair, cleaning, moving and maintenance work, the power cable must be dis-
connected from the outlet.
5. The motor control unit is not designed for continuous operation. Changing the desktop position
without interruption must not exceed the duty cycle indicated on the power supply. The unit is
thermally protected and will temporarily shut down if use exceeds the duty cycle. Allow an 18-
minute cooling period for the control unit to reset. Duty cycle of the frame for desk is 10%, max. 2
minutes operating / min. 18 minutes stop.
6. The power supply unit may only be operated with voltage as specified on the power supply label.
