Martel BetaGauge II, User Manual

Page: 142 / 197

7-1 Doc. Cal. Mode
7- Documenting Calibrator (SYS)
Mode
Overview
Typical instrument maintenance software packages
allow you to track and maintain your facility’s
instruments and their calibration histories. Using the
BetaGauge II SYS mode and an instrument
maintenance software package, the calibrator
automatically prompts you for pre-defined test points,
then documents the instrument's output and input
signals for later upload to a personal computer. Tests
performed in the SYS mode offer two main advantages
over those performed in the conventional mode:

All tests performed on an instrument are performed
in a consistent manner.

The test data recorded is objective (in other words,
not subject to your perspective).
Acquiring Instrument Maintenance
Software
If you do not own an instrument maintenance software
package and are interested in more information or a free
demonstration disk, please contact the Sales
Department at Martel Electronics Corporation, or your
local authorized Martel Sales Representative.
To contact Martel directly concerning instrument
maintenance software:
From the U.S. or Canada call:
800-821-0023, or 603-434-1433
From all other countries call:
603-434-1433