Marta MT-MG2026D, User Manual

Page: 9 / 12

9

To protect against the risk of electric shock, DO NOT IMMERSE THE APPLIANCE IN WATER OR IN ANY OTHER LIQUIDS.

Do not place the appliance on soft, unstable surface or cover it with a cloth while in operation as it may cause overheating or breakdown.

Keep away from children.

Do not leave the meat grinder switched on when you do not use it. Do not use other attachments than those supplied. Do not overload the appliance.

Keep the cord away from sharp edges and hot surfaces.

Do not place the appliance near gas or electric oven or store at heated surface. The blades are very sharp, so handle them with care.

Do not push products into the appliance by fingers while it is in use.

If food becomes lodged in feeding tube, use pusher to push it down. If this doesn’t work, turn the motor off, unplug the appliance and disassemble it to remove remaining food.

Do not carry the unit by the food tray or head. Be sure to hold the housing with both hands.

Do not fix the cutting blade and cutting plate while using sausage and kebbe attachments.

Do not operate after malfunction or damage of cord. Do not grind hard food, such as bones, nuts, ginger or other products with hard fiber.

Do not operate for more than 5 minutes at one time. Turn off switch and let it rest for at least 10 minutes to cool down the motor, otherwise the motor may be damaged.

If in case of overloading the overheat protection system is activated, switch off the appliance by pressing the button REV/OFF, unplug it, and let the appliance cool down about 20-30 minutes, and then
continue operation.

Do not attempt to repair, adjust or replace parts in the meat grinder. Repair the malfunctioning appliance in the nearest service center.

The grinder head may rotate slightly during the use, but it is normal. Do not over tighten the fixing ring to stop the movement. It may cause damage.

Removable metal parts (screw, cutting knife, cutting plates) can be oxidized after use. It is normal.
BEFORE FIRST USE

Unpack your appliance. Remove all packing materials.

Check if all parts are in a set and not damaged.

Clean all the parts according to the article «Cleaning and maintenance». Do not immerse motor unit into water.

Dry thoroughly before use.
CLEANING AND MAINTENANCE

Switch off the appliance and make sure that the motor has stopped completely.

Unplug the appliance. Disassemble by reversing the assembling steps. Press locking button and turn the whole grinder head in the direction of the arrow.

Remove the pusher and tray. Clean all the attachments and parts right after use. Do not immerse motor unit, plug and power cord in water or keep in running water.

Wipe the motor unit with a damp cloth. Wash all the parts that have come in contact with meat in warm soapy water. Do not use abrasives, chlorine containing substances or organic solvents.

The metal parts of the meat grinder are not to be washed in the dishwasher!

Do not wash all metal parts with hot water which temperature above 40
℃
. Because it will accelerate metal parts oxidation.

After washing please use dry cloth to wipe the metal parts.

Wipe all the cutting parts (cutting knife, cutting plates) with vegetable oil.

If the meat grinder won't be used for a long time, please wipe all the metal parts by vegetable oil-wet dishcloth.
CAUTION: The blades are sharp and therefore dangerous. Handle with care.
STORAGE: Switch off and unplug the appliance; let it entirely cool.Complete all requirements of Chapter CLEANING AND MAINTENANCE.Keep the appliance in a dry cool place.
SPECIFICATION
Power supply Mincing speed
Rating power /
Maximum power, W
Net / Gross weight, kg Gift box dimension (L x W x H), mm
Producer:
COSMOS FAR VIEW INTERNATIONAL LIMITED
Room 701, 16 apt, Lane 165, Rainbow North Street ,
Ningbo, China Made in China
230 V, 50 Hz up to 2,0 kg/min 700 / 3000 3,1 / 3,5 300 х 170 х 300
WARRANTY DOES NOT APPLY TO CONSUMABLES (FILTERS, CERAMIC AND NON-STICK COATING, RUBBER SEALS, ETC.)