4.
Remote Configuration
User Manual VS-104-3GSDI – V1.0
Page 60 of 67
3/2016
-
Information Display
System ID and/or Video Encoder time can be display over the video window in
Internet Explorer. Each item can be turn on or off separately, and position also can
be configured. This information is displayed
after the video is decompressed
.
-
Burn In OSD
Insert system ID and date/time
in the compressed video
. System ID and time
respectively can be turned on or off in the video. Position and Font size can be
configured also. System ID for BurnIn OSD exists independently from normal
System ID.
Note that size of Burnin OSD display varies according to the encoding resolution
setting. This is inevitable because Burnin OSD is inserted to the frames before
encoding is performed. The following table describes the rule for BurnIn OSD
display.
2
: Both System ID and Time are displayed.
1
: Either System ID or Time can be displayed. When both are enabled,
System ID is displayed.
0
: No items are displayed. This is because video area is too small to display
OSD text in large text.
-
User Defined OSD
You can enter any text you like independent.
X-Coordinate
or
Y-Coordinate
For example, if you enter 500, 500 values, OSD is placed in center of images.