1.
Introduction
User Manual VS-104-3GSDI – V1.0
Page 4 of 67
3/2016
1.1 About this Manual
This User Manual provides information on installation setup, operation of the video
encoder, as well as troubleshooting tips.
1.2 Features
Video Encoder is a video and audio transmission system that provides broadcast
quality audio and video, based on IP network through LAN, ADSL/VDSL, and wireless
LAN. An Encoder System compresses and transmits media data, while a Decoder
System receives and decompresses media data.
Video
Up to 1920x1080 @ 60fps
Highly Efficient Compression Algorithm; H.264 & MJPEG support
Wide range of Transmission Rates: 32kbps ~ 16mbps
Various Transmission Modes: CBR or VBR
Motion Detection
Audio
Multi-Transmission Mode: Uni-Directional Mode (IP Encoder to Client PC or
Decoder/ Client PC or Decoder to IP Encoder), Bi-Directional Mode
Network
Fixed IP & Dynamic IP (DHCP) support
1:1, 1:N support
Multicasting
Automatic Transmit Rate Control according to network conditions
OnVIF, PSIA compliant
Serial Data
RS-485 support
Data Pass-Through Mode: Serial Data Communication between IP Encoder and
Decoder
Data Pass-Through Mode: Serial Data Communication between Encoder-Decoder
Sensor and Alarm
Supports direct connections of External Sensor and Alarm Devices
Event Alarm
