4.
Remote Configuration
User Manual VS-104-3GSDI – V1.0
Page 31 of 67
3/2016
FTP
When
FTP
is selected, specify the following:
Encoder Address
Enter an RTP Encoder Address to receive video files.
Port
Specify a Port for the FTP operation (Port 21 is the default port in the FTP
operation). If a port other than the default is configured in the FTP Encoder, this port
needs to be changed accordingly.
ID & Password
Enter ID and Password to access the FTP Encoder.
FTP File Name
The File Names uploaded by FTP can be specified by the user. If a fixed name is
specified, the file is overwritten repeatedly. Max length of a file name is 60
characters. If the name is left blank, file name is determined according to the
internal rule implemented in the firmware. The following macros are supported to
form variable parts of file names. These strings are case-sensitive.
%YYYY: year
%MM: month
%DD: day
%hh: hour
%mm: minute
%ss: second
%EVENT: event type (Sensor1, Motion, ...)
%ADDR: address of the encoder (Domain name when DDNS is used; otherwise IP address)
“.avi” or “.jpg” will be added automatically to the filename depending on the video file type.
