4.
Remote Configuration
User Manual VS-104-3GSDI – V1.0
Page 36 of 67
3/2016
4.5 Event Configuration
Local
When a Decoder is connected to a Video Encoder, one system becomes a Local
System and the other a Remote System (generally a system which is being used by the
user is called as Local System). Event Actions can be configured from the Remote
System as well as the Local System. For Example: it is possible to turn on an alarm
device in the Local (center) Decoder System when a sensor device in Remote (site)
Video Encoder is triggered. The Local section configures the actions for the events from
the Local (self) System and the configuration activates the local devices and the
Remote sections configure the actions for events from Remote (peer) System.
The following table lists the possible actions for the events:
Action
Description
Beep
Triggers Beep Port
Alarm out
Triggers Alarm (Relay) Port
Sends Email to the specified Email Address;
AVI File can be attached
FTP
Upload AVI File to a specified FTP Encoder
Preset
Move to the Preset Position
-
Sensor1 / Sensor2
Configure the actions when the sensor is activated. Multiple actions can be set for a
single event.
-
On Video Loss
Configure the actions when video input signal is lost. Multiple actions can be set for a
single event.
