4.
Remote Configuration
User Manual VS-104-3GSDI – V1.0
Page 27 of 67
3/2016
SNMP Listen Port (0, 161, 1025 - 65535)
This port is for connecting an external device as an SNMP client. SNMP is not
used when the value is 0.
SNMP Trap Destination IP
Set the SNMP Trap Destination IP.
SNMP Trap Destination Port (0, 162, 1025 - 65535)
Set the SNMP Trap Destination Port. SNMP is not used when the value is 0.
DDNS
Select DDNS (Dynamic DNS) Encoder to use. One of the two can be selected.
DynDNS
DynDNS service is used in this mode. Refer to
www.dyndns.org
for details.
ID, Password and Domain name are needed when DynDNS is set.
Simple Network Management Protocol (SNMP)
is used by Network Management
Systems to communicate with network elements. SNMP lets TCP/IP-Based Network
Management clients use a TCP/IP-Based internetwork to exchange information about the
configuration and status of nodes. SNMP can also generate trap messages used to report
significant TCP/IP events asynchronously to interested clients. For Example: a router
could send a message if one of its redundant power supplies fails or a printer could send
an SNMP trap when it is out of paper.
