Marshall Electronics VS-104-3GSDI, User Manual

Page: 20 / 67

4. Remote Configuration
User Manual VS-104-3GSDI – V1.0 Page 20 of 67 3/2016

Audio Source
Select the Audio Source: Embedded or Analog Stereo .

Algorithm
Select the Audio Algorithm: G.711 or AAC. G.711 and AAC from client to encoder
direction are supported. Thus, bi-directional audio communication is supported.

Sample Rate
The Sample Rate defines the number of samples per unit of time taken from a
continuous signal to make a discrete signal.

Bitrate
Bitrate ranges from 64Kbps and 128kbps when AAC is selected. The sample rate is
fixed to 8KHz and 32KHz for G.711 and AAC respectively. Note: when the video
encoder is connected to a decoder, the decoder
’s audio algorithm should be set
identically to transmit the audio properly.

Mode
Select the Audio Operation Mode:
Mode Action
Off No Operation
Tx-Only Transmit Only
Rx-Only Receive Only
Tx & Rx Transmit and Receive

Input Gain
Audio Input Gain ranges from 0 to 31.
Output


Output Format
Select the format of output when Enable Preview is selected.