Marshall Electronics V-R902DLW, Operating Instructions Manual

Page: 20 / 36

20
■
OSD Tally
Use this setting to choose how tally is displayed on the screen. The available OSD Tally options depend on the Tally Source
selected in the IMD Configuration submenu
When the Tally Source is set to Standard (contact closure), OSD Tally can be set to Off , RGY , RG , or GR :
• Off On-screen tally is disabled
• RGY Red, yellow, or green tally signals are indicated at both the bottom left and bottom right corners of the screen.
Two or three colors are shown simultaneously by subdividing each tally indicator
• RG Red tally is shown at the bottom left of the screen, and green is shown at the bottom right.
• GR Green tally is shown at the bottom left of the screen, and red is shown at the bottom right.
The following diagrams show RGY, RG, and GR OSD Tally modes:
Status Display
IMD Text
00:00:00:00
RG Mode: both colors activated
(red) (red)
IMD Text
00:00:00:00
GR Mode: both colors activated
(red)
(red)
IMD Text
00:00:00:
IMD Text
00:00:00:
(red) (red)
IMD Text
00:00:00: (red)
(green)
(yellow)
(red)
(green)
(yellow)
RGY mode: single color
activated RGY mode: two colors
activated RGY mode: three colors
activated
(red)
(gree
n)
(red)
(gree
n)