Marshall Electronics V-R902DLW, Operating Instructions Manual

Page: 18 / 36

18
• Marker Toggle between different Screen Markers
• Center Marker Display/hide the Center Marker
• Marker Enable Display/hide on screen markers
• Marker Backgrd Change how markers are displayed on the screen
• IMD State Display/hide IMD text
• Anc. Time Code Display/hide time code
• OSD Tally Rotate amongst types of OSD Tally
• Audio Monitor Display/hide audio presence indicator
• CC Monitor Display/hide the Closed Caption Presence indicator
• Waveform Mode Change the data displayed on the Waveform monitor
• Overlay Position Change the position of the WFM Overlay in DLW Overlay Mode
• Limits Toggle the Limits option of the Waveform Monitor On or Off
• User 1 Recall User settings in the User 1 configuration
• User 2 Recall User settings in the User 2 configuration
• User 3 Recall User settings in the User 3 configuration
• User 4 Recall User settings in the User 4 configuration
• User 5 Recall User settings in the User 5 configuration
• User 6 Recall User settings in the User 6 configuration
• Aspect Ratio Toggle between 4:3 and 16:9 aspect ratios
• Pixel to Pixel Enable/disable Pixel-to-Pixel mode
• Ctemp/Gamma Rotate amongst color temperature settings
• Blue Only Enable/disable Blue Only mode
• Monochrome Enable/disable Monochrome mode
■
Saving and Loading User Presets
Use the SAVE CONFIG and LOAD CONFIG menus to save current settings to one of 6 presets, or load a preset. Each Preset
saves all monitor settings except for IMD configuration. Alternatively, you can save a preset to either of the function buttons
by holding down F1, F2, F3 or F4 for 5 seconds.
• Use the LOAD CONFIG menu to load one of presets USR1 – USR6. Factory default settings can also be loaded by
selecting MFG. (Factory defaults cannot be overwritten.)
• Use To perform a full system restore, which resets ALL adjustable fields on the monitor to their “fresh-from-factory”
state, press the Power, F1 and F2 button simultaneously.
Note: You will lose ALL user adjustable settings on your
monitor.
• Use the SAVE CONFIG menu to save the current settings to a preset from USR1- USR6.
■
Green, Red, Yellow GPI
Use the GPI settings to determine the function of a specific Tally pin on the back of the unit. The GPI Pin actions are toggled by
bringing the pin LOW. The Red, Green or Yellow Tally pins can activate a variety of settings, listed below.
• Tally Illuminate Green, Red or Yellow Tally LED
• Monochrome Enable/disable Monochrome mode
• Blue Only Enable/disable Blue Only mode
• Pixel to Pixel Enable/disable Pixel to Pixel mode
• CC Monitor Display/hide Closed Caption Presence indicator
• Audio Monitor Display/hide Audio Presence indicator
• OSD Tally Rotate amongst types of OSD Tally
• IMD State Display/hide IMD text
• CTemp/Gamma Rotate amongst CTemp/Gamma presets
• Layout Toggle between the available DLW layouts
• Aspect Ratio Toggle between 4:3 and 16:9 aspect ratios