Marshall Electronics V-R902DLW, Operating Instructions Manual

Page: 19 / 36

19
• Anc. Time Code Display/hide time code
• Marker Level Rotate amongst marker settings
The following settings are activated only when the Green, Red or Yellow Pin is brought into a LOW state by connecting it with
one of the GND pins. Once the Tally Pin is brought HIGH again (remove the connection to GND), the settings will be deactivated.
• Monochrome (L) Rotate amongst color temperature settings
• Markers (L) Enable/disable Blue Only mode
• Marker Mask 50% (L) Enable/disable Monochrome mode
• Marker Mask Black (L) Enable/disable Blue Only mode
• Marker Center(L) Enable/disable Monochrome mode
OSD Config Submenu
Use the OSD Configuration submenu to select a variety of information to be displayed on the screen.
■
IMD State
Use this setting to turn the IMD text display on or off. This setting affects both fixed string IMD text and remote IMD text
commands.
■
Status Display
Use this setting to enable or disable status display. When enabled, the current video input standard is displayed on the top
left of the screen. When disabled, status is only displayed for 2 seconds when the monitor is powered on, when an input is
applied, or when the input video standard changes. The status display reads “No Input” when no video input is present.
OSD Configuration Submenu