Marquis 720 FLY, Owner'S Manual

Page: 43 / 126

aC e
LeCtriCaL
s
Ystem
An AC (alternating current) electrical system is installed onboard . The power for the system is supplied by either a shore power
source or the onboard generator . The Shore Power Connection Procedure and the Onboard Generator Procedure are explained later
in this section .
The AC Control Panel is divided into two sections; the voltage and Hz varies depending on which part of the county the yacht is being
shipped to .
aC p
ower
s
oUrCes
SHORE POWER
The stern shore power connectors are located on the transom . The optional forward shore power connectors are located on the
foredeck in the forepeak locker .
The AC Main circuit breaker groups for the stern shore power connectors are located inside the lazarette storage/crew quarters, next
to the transom entrance door . The AC Main circuit breaker groups for the optional forward shore power connectors are located in the
same locker as the connectors .
NOTE: Remove all perishables from the refrigerator if the yacht is unoccupied for more than forty-eight hours . The shore
power supply to the refrigerator may be interrupted and food may spoil .
A Tip FroM MArquis!
STORInG A bAG OF Ice cubeS In yOuR ReFRIGeRATOR FReezeR SecTIOn wIll helP MAInTAIn The TeMPeRATuRe IF POweR IS dIS-
cOnnecTed. MelTed Ice IndIcATeS A lOnG PeRIOd POweR lOSS; All FOOd ShOuld be cOnSIdeRed SPOIled.
cauTiON
DO NOT SUPPLY POWER TO THE WATER HEATER WHEN IT IS EMPTY. FIRE DAMAGE MAY RESULT IF THE HEATING ELE-
MENT IS DAMAGED.
DaNgEr
ELECTRICAL SHOCK RESULTING IN DEATH OR SERIOUS INJURY CAN INCUR bY USING A DAMAGED SHORE POWER
CORD OR A CORD THAT IS NOT DESIGNED FOR THE INTENDED PURPOSE. THE SHORE POWER CORD MUST bE IN EX-
CELLENT CONDITION WITH NO CUTS, NICKS, OR AbRASIONS IN THE EXTERIOR PLASTIC COVER. THE CORD MUST bE
SPECIFICALLY DESIGNED TO CONNECT THE YACHT TO A SHORE POWER SOURCE.
CAbLEMASTER: PORT AFT LOCATION
CAbLEMASTER: bOW CENTRAL LOCATION
CAbLE DEPLOYMENT
SWITCHES
31 7027 • A2 07/11
aC e
leCTriCal
s
YsTem
s
eCTion
3