Marquis 720 FLY, Owner'S Manual

Page: 126 / 126

H
YdraULiC
s
wim
p
Latform
A hydraulic option is designed on the transom swim platform to allow the platform to lower toward the surface of the water and raise to
level deck height . The control is mounted inside of the storage area
, located on the port aft deck . The hydraulic pump is located in the
Starboard aft bilge .
Power is supplied through a circuit breaker in the DC Control panel, located in the engine room . A safety latch keeps the swim plat-
form at even deck height when not in use . The latch is released when the control is used to lower the platform . A slight delay occurs
when the platform lowers as the hydraulic system raises the locking latch before lowering can begin .
WarNiNg
DO NOT EXCEED THE 800 Lb. MAXIMUM LIFT CAPACITY FOR THE SWIM PLATFORM. THE SWIM PLATFORM IS NOT DE-
SIGNED USED TO LIFT PEOPLE. ALL PERSONS MUST bE CLEAR WHILE RAISING AND LOWERING THE PLATFORM DUE
TO THE PINCH POINT WHERE THE PLATFORM MEETS THE HULL.
Hydraulic Pump (Engine Rm. bilge Area
Swim Platform Hinge System
Hydraulic Swim Platform
o
PTions
120 5027 • K2 05/11