Trawl Explorer | V7 | System Configuration and Display
1
Sensor name displayed in Scala/Scala2 and its features.
2
This setting helps detecting the signal of the sensor among other sensor or echosounder
signals. Change default setting only if you have issues receiving data.
• Choose between
0-2
only if no interferences on the vessel (not recommended).
•
3
is default setting.
• Choose between
4-6
if you have issues receiving data. It allows you to receive more data,
but be aware they might be wrong data.
3
This setting also helps detecting the sensor signal. Leave default setting at Synchro 1.
4
Enter the same frequency as the one entered for the uplink frequency in Mosa2.
Note:
The Trawl Explorer uses a 400 Hz bandwidth. When configuring other
sensors, there needs to be a 200 Hz margin before and a 400 Hz + 200 Hz margin
after the Trawl Explorer. For example, if the Trawl Explorer sensor is given the
frequency 44000 Hz, the uplink frequency of the previous sensor has to be at 43800
Hz or lower, and the uplink frequency of the sensor after has to be at 44600 Hz or
higher.
|
36
Summary of Contents for NBTE V1
Page 1: ...Trawl Explorer User Guide...
Page 2: ......