Trawl Explorer | V7 | Sensor Configuration
Procedure
1.
To connect the sensor using a wireless communication:
a)
Connect the water-switch. The LED flashes red.
b)
Disconnect the water-switch. After a few seconds, the LED flashes green.
c)
Open Mosa2, then wait a few seconds for the sensor to be recognized. When it appears on the
discovery page, click
.
2.
To connect the sensor using the Configuration Cable:
a)
Move other electrical devices minimum 1 m away from the computer.
b)
Connect the USB connector directly to the computer. Mosa2 opens automatically and the
startup wizard is displayed. The LED on the plug is solid blue.
c)
Connect the three-pin plug to the sensor. The LED on the plug blinks alternatively blue and
green.
d)
Wait a few seconds. The configuration page of the sensor is displayed on Mosa2. The LED on
the plug is solid green.
Results
The sensor configuration page is displayed.
16
Summary of Contents for NBTE V1
Page 1: ...Trawl Explorer User Guide...
Page 2: ......
