Marport NBTE V1, User Manual

Page: 18 / 64

Trawl Explorer | V7 | Sensor Configuration
Note: You can keep the Configuration Cable continuously connected by USB, and virtually
eject or connect it when Mosa2 is in discovery mode. Click Menu > Eject Config Plug or
Connect Config Plug . If ejected, the cable stays disconnected until you virtually connect to it
or manually disconnect then connect it.
Troubleshooting: If the sensor is not detected by Mosa2, the issue might come from the
short-range wireless connection of the computer.
1. Close Mosa2.
2.
Click the short-range wireless symbol in the top-right corner of the menu bar while
holding the Shift (#) + ALT (#) keys on your Mac's keyboard.
3. Click Debug > Remove all devices .
4. Open Mosa2.
What to do next
You can now configure the sensor settings.
If you want to disconnect the sensor, click
Menu > Disconnect .
| 17