MARLO MATD 9500 XT, Manual

Page: 22 / 71

Page 19
Setting
Specification Sheet
NOTE: Some options may not be available depending on valve model or other options chosen.
Circle and/or Fill in the Appropriate Data for Future Reference.
System Type: Meter Immediate / Time Clock Delayed / Twin Tank / Volume Override Delay
Volume Override Immediate / Remote Signal Start Delayed
Remote Signal Start Immediate / Meter Delayed Week Reserve
Meter Delayed Variable Reserve / Meter Delay Fixed Reserve
Valve Type: 2510/2850 2750 2900 3150 3900 9000/9100/9500 Proprietary A B E
Regenerant Flow: Down Flow / UF Variable Fill / UF Brine First
Downflow DB BW / UF Backwash / Back Wash Filter
Initial Tank: Tank 1 or Tank 2
Remote Signal Start: On or Off
Display Format: U.S. or Metric (French Degrees, German Degrees, or PPM)
Unit Capacity: _____________ Grains/French Degrees/German Degrees/PPM
Water Hardness: _____________ Grains/French Degrees/German Degrees/PPM
Capacity Safety Factor: Zero or ______ %
Volume Override: _________ (Gallons or M
3
)
Regeneration Day Override: Off or Every ______Days
Regeneration Time: Delayed _________AM/PM or ______Immediate
Regeneration Cycle Step #1: _ _ : _ _ : _ _
Regeneration Cycle Step #2: _ _ : _ _ : _ _
Regeneration Cycle Step #3:
_ _ : _ _ : _ _
Regeneration Cycle Step #4: _ _ : _ _ : _ _
Regeneration Cycle Step #5: _ _ : _ _ : _ _
Media Volume: _________ (CuFt or Liter)
Salt Dosage: _________ (lbs/CuFt or grams/Liter)
BLFC Size: _________ gpm
Auxiliary Relay: Enabled or Disabled
Auxiliary Relay Start 1: _ : _ _ : _ _
Auxiliary Relay End 1: _ : _ _ : _ _
Auxiliary Relay Start 2: _ : _ _ : _ _
Auxiliary Relay End 2: _ : _ _ : _ _
Chemical Pump: Enabled or Disabled
CPO Aux Relay Volume: _________ (Gallons or M
3
)
CPO Aux Relay: _ _ : _ _ : _ _
Flow Meter Size: Paddle: .75” 1.0” 1.5” 2.0” 3.0”
Turbine: .75” 1.0” 1.5”
Generic Flow Meter: Maximum Flow Rate: Add _ _ Gallons every _ _ Pulses
MAT D 9500 XT MANUAL