15
Alarm Feature Programming (Part 2)
Turn the ignition switch from the OFF position to the
ON position 3 times leaving it in the OFF position the
third time.
Before 15 seconds has passed, push and release the
valet switch 3 times then push the valet switch a fourth
time and hold it down until 2 short chirps/beeps + 1
long chirp beep is heard then release it. You are now in
Part 2 Programming Mode.
Step 1
Step 2
3X
3X + 1X (Hold)
Turn On the Ignition
3 long chirps and 3 flashes of the parking lights will confirm
exit of the programming mode.
Note: Waiting 15 seconds after the last command will also
cause the system to automatically exit the programming mode.
Step 4
One Chirp
Two Chirps
Three Chirps
Four Chirps
Button
LED One Pulse
LED Two Pulse
LED Three Pulse
LED Four Pulse
(Factory Default Setting)
Step 3
Remote Feature Programming
Use the transmitter buttons as illustrated to adjust the features required. Keep re-pressing the transmitter button
that relates to the feature you want to adjust until the correct amount of chirp/beeps is heard. Move on to the next
feature.
Double Pulse Unlock
Ignition Controlled
Door Locks Only
Ignition Controlled
Door Unlocks Only
Ignition Controlled Door
Locks and Unlocks
Door Locks Before Start
Without this Feature
Pathway Illumination
Feature “Off”
Parking Light “On”
for 30 Seconds Upon
an Unlock Signal
3.5 Second Door
Lock Pulse
0.8 Seconds Door
Lock Pulse
Ignition Controlled
Locks Off
Parking Lights “On”
for 30 Seconds Upon
and Unlock Signal and
10 Second Upon a
Lock Signal
Door Lock with
"Comfort Features"
Door Lock After
Shutdown
Door Lock Before Start
and Door Lock After
Shutdown
Comfort Feature: Some vehicles (Mercedes, BMW, VW, Opel, etc.) have a special “Comfort Feature”. When you
lock the door with the key, you just have to keep on turning the key in the door for about 5 or 7 seconds and the
window will close directly.
If your vehicle has “Comfort Feature” and you wish the door being locked and the window being closed
automatically at the same time by remote control, you can set the alarm feature with “Comfort Feature”.
M7A-IM 6/22/06 4:53 PM Page 15
