Market Forge Industries MPS-3E, Owner'S Manual

Page: 17 / 38

14
5.0 PREVENTIVE MAINTENANCE (Continued)
7. Leave door slightly open when steamer is not in use.
CAUTION: Do not use cleaning agents that are corrosive.
NOTICE:
Contact the factory, the factory representative or a local service
company to perform maintenance and repairs should the appliance
malfunction. Refer to warranty terms.
CLEANING (WEEKLY)
Weekly, or more often if necessary:
1. Clean exterior with a damp cloth and polish with a soft dry cloth.
2. Use a non-abrasive cleaner to remove discolorations.
Following daily and periodic maintenance procedures will enhance long-life for your equipment.
Climatic conditions - salt air - may require more thorough and frequent cleaning otherwise the
life of the equipment could be adversely affected.
It is
NOT RECOMMENDED to use cleaning agents that are corrosive.
Use of cleaning agents that contain chloride, acids or salts which are corrosive may cause
pitting and corrosion when used over a period of time; this will reduce the life of the appliance.
Should pitting or corrosion occur, this is not covered by warranty.
Follow the recommended cleaning instructions. Use a mild detergent, warm water and rinse
thoroughly.
NEVER SPRAY WATER INTO ELECTRIC CONTROLS OR LOUVERS.
DELIMING PROCEDURE:
Delime once every other month.
REMOVAL OF SCALE DEPOSITS
It is recommended that your steamer be delimed once a month, or more often if necessary.
Should your steamer develop a heavy build-up of lime scale deposits, use the TOTAL
CONCEPT TREATMENT KIT available from your authorized service agent.