77
EN
(15) The location of water treatment equipment (chlorinator, ozonizer, etc.) has
a major impact on the service life of the heat pump. Such a disinfection dosing
device must be located so that the dosing outlet is located behind the heat
pump. This part of the line requires at least a siphon between the heat pump
and the chlorinator to prevent water backflow.
5. ELECTRICAL CONNECTION
IMPORTANT: The heat pump is supplied with a supply cable fitted with
a plug for connection to a socket. The installation of the socket must
comply with the requirements of ČSN 33 2000, including adequate
protection and the use of a current protector with a tripping current of
up to 30 mA.
The heat pump together with the power supply of the filter unit pump must, if
possible, be connected via a separate circuit breaker and switch, or a timer for
regular commissioning. The supply must be sufficiently dimensioned and equipped
with a current protector with a tripping current of up to 30 mA. Electrical network
characteristics (voltage and frequency) including the fuse must correspond to the
operating parameters of the device.
CHLORINE
DISPENSER
FILTER
FLASK
FILTERING
PUMP
WATER
SUPPLY
FLOW DIRECTION
INTO THE POOL
FROM FILTRATION
HOSE ADAPTER
CONDENSATE OUTLET
