background image

41

ENGLISH

BASIC 

CONNECTIONS

BASIC OPERA

TION

ADV

ANCED 

CONNECTIONS

SETUP

ADV

ANCED 

OPERA

TION

TROUBLESHOOTING

OTHERS

NAMES AND 

FUNCTIONS

OTHERS

•  Neo:6 technology allows various sound elements 

within a channel or channels to be steered 
separately, and in a way which follows naturally 
from the original presentation.

•  Neo:6 offers a music mode to expand stereo nonmatrix 

recordings into the fi ve- or six-channel layout, in a way 
which does not diminish the subtlety and integrity of 
the original stereo recording.

• dts Digital Surround ES

DTS-ES Extended Surround is a new multichannel 
digital signal format developed by Digital Theater 
Systems Inc. While offering high compatibility with 
the conventional DTS Digital Surround format, DTS-
ES Extended Surround greatly improves the 360-
degree surround impression and space expression 
thanks to further expanded surround signals. This 
format has been used professionally in movie 
theaters since 1999.
In addition to the 5.1 surround channels (FL, FR, C, 
SL, SR and LFE), DTS-ES Extended Surround also 
offers the SB (Surround Back) channel for surround 
playback with a total of 6.1 channels. DTS-ES 
Extended Surround includes two signal formats with 
different surround signal recording methods, as DTS-
ES Discrete 6.1 and DTS-ES Matrix 6.1.

• dts Digital Surround 96/24

The stereo CD is a 16-bit medium with sampling at 
44.1 kHz. Professional audio has been 20- or 24-
bit for some time, and there is increasing interest 
in higher sampling rates both for recording and for 
delivery into the home. Greater bit depths provide 
extended dynamic range. Higher sampling rates 
allow wider frequency response and the use of anti-
alias and reconstruction fi lters with more favorable 
aural characteristics.

DTS 96/24 allows for 5.1channel sound tracks to be 
encoded at a rate of 96kHz/24bits on DVD-Video 
titles.
When DVD-video appeared, it became possible to 
deliver 24-bit, 96 kHz audio into the home, but only in 
two channels, and with serious limitations on picture. 
This capability has had little use.
DVD-audio allows 96/24 in six channels, but a 
new player is needed, and only analog outputs are 
provided, necessitating the use of the D/A converters 
and analog electronics provided in the player.

DTS 96/24 offers the following:

1. Sound quality transparent to the original 96/24 

master.

2. Full backward compatibility with all existing 

decoders. (Existing decoders will output a 48 kHz 
signal)

3. No new player required: DTS 96/24 can be carried 

on DVD-video, or in the video zone of DVD-audio, 
accessible to all DVD players.

4. 96/24 5.1-channel sound with full-quality full-

motion video, for music programs and motion 
picture soundtracks on DVD-video.

Dolby Digital identifi es the use of Dolby Digital audio 
coding for such consumer formats as DVD and DTV. 
As with fi lm sound, Dolby Digital can provide up 
to fi ve full-range channels for left, center, and right 
screen channels, independent left and right surround 
channels, and a sixth (“.1”) channel for low-frequency 
effects.

Dolby Surround Pro Logic 

II

 is an improved matrix 

decoding technology that provides better spatiality 
and directionality on Dolby Surround program 
material; provides a convincing three-dimensional 
soundfi eld on conventional stereo music recordings; 
and is ideally suited to bring the surround experience 
to automotive sound. While conventional surround 
programming is fully compatible with Dolby Surround 
Pro Logic 

II

 decoders, soundtracks will be able to be 

encoded specifi cally to take full advantage of Pro 
Logic 

II

 playback, including separate left and right 

surround channels. (Such material is also compatible 
with conventional Pro Logic decoders.)

Dolby Digital EX creates six full-bandwidth output 
channels from 5.1-channel sources. This is done 
using a matrix decoder that derives three surround 
channels from the two in the original recording. For 
best results, Dolby Digital EX should be used with 
movies soundtracks recorded with Dolby Digital 
Surround EX.

About Dolby Pro Logic 

II

x

Dolby Pro Logic 

II

x technology delivers a natural 

and immersing 7.1-channel listening experience 
to the home theater environment. A product of 
Dolby’s expertise in surround sound and matrix 
decoding technologies, Dolby Pro Logic 

II

x is a 

complete surround sound solution that maximizes 
the entertainment experience from stereo as well as 
5.1-channel encoded sources.

Dolby Pro Logic 

II

x is fully compatible with Dolby 

Surround Pro Logic technology and can optimally 
decode the thousands of commercially available 
Dolby Surround encoded video cassettes and 
television programs with enhanced depth and 
spatiality. It can also process any high-quality 
stereo or Advanced Resolution 5.1-channel music 
content into a seamless 6.1- or 7.1-channel listening 
experience.

The Dolby Headphone technology provides a 
surround sound listening experience over headphones. 
When listening to multichannel content such as DVD 
movies over headphones, the listening experience 
is fundamentally different than listening to speakers. 
Since the headphone speaker drivers are covering 
the pinna of the ear, the listening experience differs 
greatly from traditional speaker playback. Dolby 
utilizes patented headphone perspective curves to 
solve this problem and provides a non-fatiguing, 
immersive, home theater listening experience. Dolby 
Headphone also delivers exceptional 3D audio from 
stereo material.

Manufactured under license from Dolby Laboratories. 
“Dolby”, “Pro Logic”, and the double-D symbol are 
trademarks of Dolby Laboratories.

Circle Surround 

II

 (CS-

II

) is a powerful and versatile 

multichannel technology. CS-

II

 is designed to enable 

up to 6.1 multichannel surround sound playback 
from mono, stereo, CS encoded sources and other 
matrix encoded sources. In all cases the decoder 
extends it into 6 channels of surround audio and a 
LFE/subwoofer signal. The CS-

II 

decoder creates a 

listening environment that places the listener “inside” 
music performances and dramatically improves 
both hi-fi audio conventional surround-encoded 
video material. CS-

II

 provides composite stereo rear 

channels to greatly improve separation and image 
positioning – adding a heightened sense of realism 
to both audio and A/V productions.

CS-

II

 is packed with other useful feature like dialog 

clarity (SRS Dialog) for movies and cinema-like bass 
enrichment (TruBass). CS-

II

 can enable the dialog 

to become clearer and more discernable in movies 
and it enables the bass frequencies contained in 
the original programming to more closely achieve 
low frequencies – overcoming the low frequency 
limitations of the speakers by full octave.

Circle Surround 

II

, TruSurround, SRS and 

 

symbol are trademarks of SRS Labs, Inc.
Circle Surround 

II

, and TruSurround technology are 

incorporated under license from SRS Labs, Inc.

HDCD

®

 (High Defi nition Compatible Digital 

®

) is a 

patented process for delivering on Compact Disc the 
full richness and details of the original microphone 
feed.
HDCD encoded CDs sound better because they are 
encoded with 20-bits of real musical information as 
compared to 16-bits for all other CDs. 
HDCD overcomes the limitation of the 16-bit CD 
format by using a sophisticated system to encode 
the additional four bits onto the CD while remaining 
completely compatible with the CD format.
When listening to HDCD recordings, you hear more 
dynamic range, a focused 3-D sound stage, and 
extremely natural vocal and musical timbre. With 
HDCD, you get the body, depth and emotion of the 
original performance not a fl at, digital imitation.

HDCD system manufactured under license from 
Microsoft. This product is covered by one or more 
of the following: In the United States 5,479,168 
5,638,074 5,640,161 5,808,574 5,838,274 5,854,600 
5,864,311 5,872,531 and in Australia 669,114 with 
other patents pending.

HDMI, the 

 and High-Defi nition Multimedia 

Interface are trademarks or registered trademarks of 
HDMI Licensing LLC.

SR4003̲U̲01̲E2̲2.indd   41

SR4003̲U̲01̲E2̲2.indd   41

08.6.20   5:06:36 PM

08.6.20   5:06:36 PM

Summary of Contents for SR4003

















































Reviews: