Marantz NR1606 Owner'S Manual Download Page 67

Page: 67 / 291

Adjusting the volume

Use VOLUME

to adjust the volume.

The variable range differs according to the input signal and channel level setting.

You can also adjust the master volume by turning VOLUME on the main unit.

Turning off the sound temporarily

(Muting)

Press MUTE

MUTE indicator on the display flashes.

appears on the TV screen.

The sound is reduced to the level set at “Mute Level” in the menu. (

p. 163)

To cancel mute, either adjust the sound volume or press MUTE

again.

Playback a DVD player/Blu-ray Disc

player

The following describes the procedure for playing DVD player/Blu-ray Disc

player.

Prepare for playback.

Turn on the power of the TV, subwoofer and player.

Change the TV input to the input of this unit.

Press POWER

to turn on power to the unit.

Press DVD or Blu-ray to switch an input source for a

player used for playback.

Play the DVD player or Blu-ray Disc player.

Surround playback (

p. 122)

Contents

Connections

Playback

Settings

Tips

Appendix

Front panel

Display

Rear panel

Remote

Index

Summary of Contents for NR1606



































































































































































































































































































Search results

Summary of Contents for NR1606

Reviews:

Related manuals for NR1606

Brands by name

Popular brands

Marantz NR1606, Owner'S Manual

Search results

Summary of Contents for NR1606

Reviews:

Related manuals for NR1606

Brands by name

Popular brands