Marantz NR1606 Owner'S Manual Download Page 128

Page: 128 / 291

Original sound mode

Sound mode type

Description

Multi Ch Stereo

This mode is for enjoying stereo sound from all speakers.

Stereo audio (2-channel) sources are played back via the front (L/R) speakers, the surround speakers and surround back

speakers (if connected).

Virtual

This mode lets you experience an expansive surround sound effect when playing back through just the front (L/R)

speakers only, and when listening with stereo headphones.

Auto sound mode

Sound mode type

Description

Auto

In this mode, the type of digital signal input, such as Dolby Digital, Dolby TrueHD, Dolby Digital Plus, Dolby Digital EX,

Dolby Atmos, DTS, DTS-HD, DTS:X, DTS-ES, PCM (multi-channel) is detected, and the playback mode switches

automatically to the corresponding mode.

If the input signal is analog or PCM (2-channel), stereo playback is used. For Dolby Digital or DTS, the music is played

back according to the respective channel number.

Contents

Connections

Playback

Settings

Tips

Appendix

128

Front panel

Display

Rear panel

Remote

Index

Summary of Contents for NR1606



































































































































































































































































































Search results

Summary of Contents for NR1606

Reviews:

Related manuals for NR1606

Brands by name

Popular brands

Marantz NR1606, Owner'S Manual

Search results

Summary of Contents for NR1606

Reviews:

Related manuals for NR1606

Brands by name

Popular brands