Marantz NR1606 Owner'S Manual Download Page 267

Page: 267 / 291

DTS-ES™ Discrete 6.1

DTS-ES™ Discrete 6.1 is a 6.1-channel discrete digital audio format

adding a surround back (SB) channel to the DTS digital surround sound.

Decoding of conventional 5.1-channel audio signals is also possible

according to the decoder.

DTS-ES™ Matrix 6.1

DTS-ES™ Matrix 6.1 is a 6.1-channel audio format that inserts a surround

back (SB) channel to the DTS digital surround sound through matrix

encoding. Decoding of conventional 5.1-channel audio signals is also

possible according to the decoder.

DTS Express

DTS Express is an audio format supporting low bit rates (max. 5.1-

channels, 24 to 256 kbps).

DTS-HD

This audio technology provides higher sound quality and enhanced

functionality than the conventional DTS and is adopted as an optional

audio for Blu-ray Disc.
This technology supports multi-channel, high data transfer speed, high

sampling frequency, and lossless audio playback. Maximum 7.1-channels

are supported in Blu-ray Disc.

DTS-HD High Resolution Audio

DTS-HD High Resolution Audio is an improved version of the conventional

DTS, DTS-ES and DTS 96/24 signals formats, compatible with sampling

frequencies of 96 or 48 kHz and up to 7.1-channels of discrete digital

sound. High data bit rate performance provides high quality sound. This

format is fully compatible with conventional products, including

conventional DTS digital surround 5.1-channel data.

DTS-HD Master Audio

DTS-HD Master Audio is a lossless audio format created by Digital

Theater System (DTS). This format provides the facility to support up to 8

audio channels with a sampling frequency of 96 kHz/24 bit resolution and

up to 6 audio channels with a sampling frequency of 192 kHz/24 bit

resolution. It is fully compatible with conventional products, including

conventional DTS digital surround 5.1-channel data.

DTS:X

DTS:X produces a hemisphere of audio, where flyovers as well as ambient

backgrounds become truly enveloping. DTS:X objects enable audio to

move smoothly from one speaker to any other creating life-like realism.

DTS Neural:X

Enables an immersive audio experience for older content. DTS Neural:X

can upmix your stereo, 5.1 or 7.1 content to take full advantage of all

speakers in your surround sound system.

Contents

Connections

Playback

Settings

Tips

Appendix

267

Front panel

Display

Rear panel

Remote

Index

Summary of Contents for NR1606



































































































































































































































































































Search results

Summary of Contents for NR1606

Reviews:

Related manuals for NR1606

Brands by name

Popular brands

Marantz NR1606, Owner'S Manual

Search results

Summary of Contents for NR1606

Reviews:

Related manuals for NR1606

Brands by name

Popular brands