To apply the target curve to the compensating FIR filter the “EQ Target” window should be closed and
the “OK” button must be clicked in the confirmation popup.
In “Phase Only” mode the target curve can't be set.
Once the FIR filter is computed with the user defined parameters, the corresponding coefficients can
be saved in a file (and recalled from outside the Wizard) or stored in the DSP to start listening tests.
To save the filter file, click the “Save FIR” button at the top right of the “Calculate FIR” page: a file
browse window appears allowing to select a folder in the PC and to enter a file name.
To store the FIR filter in the device, click the “Store FIR” button at the top right of the screen.
