Routing Input to Ch Input
frame: The “Routing Input to Ch Input” frame is allowing the user to send
one input to more than one FIR filter on the input path, so to have the possibility to control more two
or more way systems with different FIR for phase correction, still providing them the same input
source if required. The way of routing the signal is here in MIXER MODE, giving the
LPP240A
the
possibility to not only assign one input to the desired FIR for phase correction, but also to control on
any FIR the level of the assigned input.
Routing Ch Output to Ch Output
frame: this routing is the “classic” routing allowing to assign each
Input to each output of the
LPP240A
. Particularly, being here the routing AFTER the FIR for phase
correction, it is here possible to extend the principle of making a flexible controller with FIR on Input
for phase correction and processes for 2ways outputs only, having here the possibility to assign one
input and its own FIR for phase correction to more than two outputs, so extending the possibility to
control system with more than two ways. The way of routing the signal is here in MIXER MODE, giving
the LPP240A the possibility to not only assign one input to the desired output, but also to control on
any output the level of the assigned input.
Synoptic Image
: The Synoptic Image is showing in clear way the defined routings , so as gives the
possibility to directly MUTE/UNMUTE any input and nay output, just clicking on the related
loudspeaker icons. Clicking on any block of the Input path or Output path, the user is immediately
brought to the editing window of the related Input or Output channel. A click on the 'INS” blocks of
the Input paths, is opening the “wizard” process for the related FIR phase correction coefficients
calculation (see NOTE A)
