OUTPUT WINDOW
All the processes available on the Output Paths can be edited within the Output Windows.
Eq Flat and Bypass Controls
: the EQ Flat control is allowing to flat in one shot the 7 bands Parametric
Eq. The Bypass control, instead, is allowing to temporarily Bypass the Eq, without resetting the
current setting.
EQ Filters
: within this frame, the all 7 filters of the PEQ can be defined in terms of type, gain, Freq, Q
-
Fitlers type
: on top of the Slider and the box showing the gain level, there is a button that once
pressed is opening a wide list of filters type which can be selected, for each filter of the parametric Eq.
The available filters are
Bell
(constant Q),
Hi/Low Shelving 1
st
/2
nd
/Q
(classic first and second order
and symmetrical ones with variable Q),
Lp/Hp 1
st
/2
nd
/Q
(classic 6dB/Oct first order, 12dB/Oct second
order and variable Q),
Band Pass
,
Notch
,
All Pass 1
st
/2
nd
Ord
.
-
Gain
: the filter types which can gain, have the gain controlled by a slider ranging from -15dBu up to
+15dBu.
-
Freq
: here can be inserted the Center, Cutting Frequency of the selected filter, ranging from 20Hz up
to 20kHz.
-
Q
: there where usable, the Q can be set with a range depending from the selected filter.
-
Byp:
any filter of the 7 of the Parametric Eq, can be singularly bypassed, so to have the possibility to
a quick A/B comparison between the signal when active or not the filter currently in editing phase.
