The User has the possibility to connect the device via
USB
or
RS485
or
TCP/IP
* If the
USB
is selected, the User must set the number of the COM used to connect the device
By the way, using the button “Check” the Sw will scan the Pc ports looking for the potentially
connected ones: set on the Com Select window the found Com ports until found the working one.
In order to use the USB connection for remotely controlling the LPP240A, need first set on the unit
the communication interface as USB.
To set the USB interface on the LPP240A the following steps have to be done:
1. press the “PM3/UTILITY” button on the front panel, for entering the “UTILITY MENU”
2. use the “PM1/ENTER” encoder for selecting the “Interface Utility” field
3. press the “PM1/ENTER” button, for entering the “Interface Setup” field
4. use the “PM2/ESC” encoder, for selecting the USB interface
5. after operated the selection, press the “PM2/ESC” button the necessary times for moving back
on the several fields up to the default screen, showing “LPP240A” and the current loaded
