Operator’s Manual
Self-Propelled Scissor Lift
Version1
8
Do not drive the machine on or near uneven terrain, unstable surfaces or other hazardous conditions with
the platform raised.
Do not place or attach fixed or overhanging loads to any part of this machine.
Do not place ladders or scaffolds in the platform or against any part of this machine.
Do not transport tools and materials unless they are evenly distributed and can be safely handled by
person(s) in the platform.
Do not use machine on a moving or mobile surface or vehicle
.
Be sure all tires are in good condition
,
castle nuts are properly tightened and cotter pins are properly
installed
.
Do not use batteries that weigh less than the original equipment
.
Batteries are used as counterweight
and are critical to machine stability
.
Check the specifications of the batteries for their weight.
Do not use the machine as a crane
.
Do not push the machine or other objects with the platform
.
Do not contact adjacent structures with the platform
.
3.2.3
Operation on Slopes Hazards
Do not drive the machine on a slope that exceeds the vertical or lateral slope rating of the machine.
Slope ratings apply to the machine in the stowed position.
Note
: Slope ratings are subject to ground conditions and adequate traction.
Refer to the Specifications for vertical and lateral slope ratings of the machine.
3.2.4
Fall Hazards
Personnel in the platform should wear a Personal Fall Protection Equipment (PFPE) and comply with
applicable governmental regulations. Attach the PFPE to one of the anchor points of the platform.
