Operator’s Manual
Self-Propelled Scissor Lift
Version1
24
Test the Up/Down Functions
17.
Type A/B controller
: press the lift function enable button. Indicator light must be on..
18. Slowly push the control handle forward.
➢
Result
: The platform should raise. The pothole guards should deploy.
19. Release the control handle.
➢
Result
: The platform should stop raising.
20. Press and hold the function enable switch on the control handle.
21. Slowly pull the control handle backward.
➢
Result
: The platform should lower. The descent alarm should sound while the platform is
lowering.
22. Release the control handle.
➢
Result
: The platform should stop lowering.
Test the Lowering Safety stop
23. Press and hold the function enable switch on the control handle.
24. Slowly push the control handle forward and raise the platform more than 6.56 ft (2m) from its
stowed position.
➢
Result
: The pothole guards should deploy.
25. Press and hold the function enable switch on the control handle.
26. Slowly pull the control handle backward and lower the platform.
➢
Result
: The platform lowering should stop automatically when the platform is at a height of
5 ft (1,5 m) above its stowed position. An alarm should sound.
27. Release the control handle and wait for 3 seconds.
28. Press and hold the function enable switch on the control handle.
29. Slowly pull the control handle backward and completely lower the platform.
