Operator’s Manual
Self-Propelled Scissor Lift
Version1
10
Do not operate the machine in the path of any crane or moving overhead machinery unless the controls of
the crane have been locked out and
/
or precautions have been taken to prevent any potential collision.
No stunt driving or horseplay while operating the machine.
Do not lower the platform unless the area below is clear of personnel and obstructions.
Limit travel speed according to condition of ground surface, congestion, slope, location of personnel
and any other factors which may cause collision.
3.2.6
Bodily Injury Hazards
Do not operate the machine with a hydraulic oil or air leak. An air leak or hydraulic leak can penetrate
and/or burn skin.
Improper contact with components under any cover will cause serious injury. Only trained
maintenance personnel should access compartments. Access by the operator is only advised when
performing a pre-operation inspection. All compartments must remain closed and secured during
operation.
3.2.7
Component Damage Hazards
Do not use machine as a ground for welding.
3.2.8
Explosion and Fire Hazards
Do not operate the machine or charge the battery in hazardous locations or locations where potentially
flammable or explosive gases or particles may be present.
