Operator’s Manual
Self-Propelled Scissor Lift
Version1
12
3.3.2
Explosion Hazards
Keep sparks, flames and lighted tobacco away from batteries. Batteries emit an explosive gas.
The battery tray should remain open during the entire charging cycle.
Do not contact the battery terminals or the cable clamps with tools that may cause sparks.
3.3.3
Component Damage Hazards
Do not use any battery charger greater than 24V to charge the batteries.
3.3.4
Electrocution Hazards
Connect the battery charger to a grounded, AC, 3-wire electrical outlet only.
Inspect daily for damaged cord, cables and wires. Replace damaged items before operating.
Avoid electrical shock from contact with battery terminals. Remove all rings, watches and other jewelry.
3.3.5
Tip-Over Hazards
Do not use batteries that weigh less than the original equipment. Batteries are used as counterweight
and are critical to machine stability. Check the specifications of the batteries for their weight.
3.3.6
Lifting Hazards
Use the appropriate number of people and proper lifting techniques when lifting batteries.
