Operator’s Manual
Self-Propelled Scissor Lift
Version1
22
6.2 Function Tests
Do Not Operate Unless:
•
You learn and practice the principles of safe machine operation contained in this
Operator’s Manual.
1. Avoid hazardous situations.
2. Always perform a pre-operation inspection.
3. Always perform function tests prior to use.
Know and understand the function tests before going on to the next section.
4. Inspect the workplace.
5. Only use the machine as it was intended.
6.2.1
Fundamentals
o
The Function Tests are designed to discover any malfunctions before the machine is put into
service. The operator must follow the step-by-step Instructions to test all machine functions.
o
A malfunctioning machine must never be used. If malfunctions are discovered, the machine must be
tagged and removed from service. Repairs to the machine may only be made by a qualified service
technician, according to the manufacturer's specifications.
o
After repairs are completed, the operator must perform a pre-operation inspection and function tests
again before putting the machine into service.
6.2.2
Tests
1.
Select a test area that is firm, level and free of obstruction.
2.
Make sure the battery pack is connected.
At the Ground Control Panel
CAUTION
Only use the ground control panel as an emergency control. Always use the platform
controller as standard operation control.
3.
Turn out the Emergency Stop buttons of the platform controller and ground control panel to the
ON
position.
4.
Turn the key switch of the ground control panel to ground position.
Test Emergency Stop
5.
Push in the Emergency Stop button of the ground control panel to the OFF position.
➢
Result:
No functions should operate.
6.
Turn out the Emergency Stop button of the ground control panel to the ON position.
