DVD-041 EMPEROR
u
BASIC 2
Connect the DVD player directly through the TV and
not through any other source. What you’re viewing is
the effect of the copy protection circuitry required on
all DVD players.
If you don’t have a video input on your TV, you must
purchase an RF adapter from your dealer
The DVD video player does not start playback
Place the disc with the graphics side up.
Place the disc on the disc tray correctly inside the guide.
Make sure the disc is free from scratches & fingerprints.
Press the SETUP button to turn off the menu screen.
Cancel the parental lock function or change the pa-
rental lock level.(The Pre-set password is 3308.)
Turn the power off then disconnect the power plug
and reinsert it back into the wall. Retry again.
The recorder Cannot record.
The type of the disc is wrong, it’s not a DVD+RW
or DVD+R disc.
The disc is recorded full.
The disc(DVD+R or DVD+RW) is locked, it should be
unlocked. The DVD+R has been finalized.
Different format(NTSC/PAL) between the disc and
the signal.
Specification
Power supply:
~230V/50Hz
Power consumption:
25W
Weight of Player:
2kg
Weight of Remote Control:
60g
Signal system:
AUTO/NTSC/PAL
Laser:
Semiconductor laser, wavelength 650 nm
