DVD-041 EMPEROR
u
BASIC 2
2
To use the remote controll, please point the remote con-
trol unit at the remote sensor on the DVD player.
Notes
!
Do not use different types of batteries.
When the remote control unit does not function
correctly or its operation range reduces, please
replace both batteries at the same time.
Keep the remote controll away from extremely
hot or humid locations.
If the remote control unit will be not used for a long
time, please remove the batteries to avoid possible
damage from batterys leakage or corrosion.
Do not open the remote controller unit.
Back Panel Connections
Component Video
(Y, Cb i Cr)
– Component video - A video signal in which
the brightness (luminance) and color (chrominance) por-
tions of the signal are processed separately. Component
video signals provide greater color accuracy than S-video
or composite signals.
Coaxial Audio Output
Use digital audio outputs for connection with an external
Dolby
®
Digital or DTS
®
decoder. To use the Coaxial output,
you will need to purchase an Coaxial cable for connection
with the Coaxial Input Terminal of an AV amplifier. (Digital
cable is not included with this player.
Composite Video Output Terminal
Composite video output is the most commonly used
video connection in use today and is supported by most
televisions and A/V receivers. Composite video is set to
display without user setup.
SCART Terminal
The SCART terminal can be connected to the TV set
equipped with SCART connectors. Whenever the SCART
terminal is used, you must set the DVD player’s “PREFE-
RENCES PAGE”/ “VIDEO OUTPUT” setting to “SCAR-
T”.
NOTE
: S-Video and SCART jacks cannot output signals
simultaneously.
