Manitowoc CNF0201, Technician'S Handbook

Page: 35 / 120

Part Number 000015432 Rev02 5/21 35
Step 6
Refer to chart and premix the correct solution
of cleaner/descaler and cool water.
Model Amount of Cleaner/Descaler
Part Number 000000084
Amount of
Water
CNF0201 CNF0202 2 oz (60 ml) 32 oz (1 liter)
Step 7
Remove the top cover from the ice chute and
pour the cleaner/descaler and water solution into the
evaporator. Add the entire amount of premixed solution
(excess solution will exit through the overflow tube in the
water reservoir).
Step 8 Replace the ice chute cover and allow the ice
machine to stand for 30 minutes.
Step 9 Turn on the water supply to the ice machine.
Step 10
Move the toggle switch to the ICE position. The
compressor will energize and produce ice with the cleaning
solution.
Step 11 The ice machine will freeze and discharge the
descaler/water solution into the bin. Allow the cycle to run
for 15 minutes.
NOTE: Discard all ice produced during the process.
Descaling and sanitizing must be performed on adjacent
surface areas not contacted by the water distribution
system. Refer to “Component Disassembly for Descaling
and Sanitizing” on page 38 - Disassemble, descale and
sanitize the ice machine a minimum of once every six
months.