Manitou MSI 20 D, Operator'S Manual, Page: 68 / 116

2 - 40
25 - T
OWING PIN
Located at the back of the truck, this pin makes it possible to couple a trailer.
The capacity is limited for each lift truck by the Permissible Total Moveable
Weight (P. T. M. W.), the drawbar pull and the maximum vertical drawbar pull
on the towing pin. This information is indicated on the manufacturer's plate on
each lift truck (See chapter : IDENTIFICATION OF THE LIFT TRUCK in
paragraph : 2 - DESCRIPTION).
NOTE : For towing, optional solutions exist, consult your dealer.
Before towing trailers, ensure that the clip is fully engaged in the towing pin.
26 - C
ABIN LIFTING
Ensure that the mast is tilted forwards to a maximum, that the engine is
stopped and that the two doors are shut before lifting the cabin.
UNLOCKING THE CABIN
- Half-open the right door of the cabin.
- Keep the ignition on in the lift truck.
- Unlock the cabin by means of the lever 1 (Fig. A) in position A.
LIFTING THE CABIN
- Maintain the door half-open.
- Press the top of the switch 2 (Fig. B) until complete lifting of the cabin.
- Put the lever 1 (Fig. A) back into position B.
- Shut the door.
- Place the safety prop 3 (Fig. C) onto its stop 4 (Fig. C).
Check that any object left in the driver’s stand cannot impede the operation.
LOWERING THE CABIN
- Fold the safety prop back into its clip 5 (Fig. D).
- Half-open the right door of the cabin.
- Lower the cabin into its initial position by pressing the bottom of the switch 2
(Fig. B).
- Ensure that the cabin is locked.
- Shut the door.
Check that nothing or nobody can impede the lowering of the cabin.
C
3
4
B
1 st ASSEMBLY
2 nd ASSEMBLY
2
2
A
1
B
A