Manitou MSI 20 D, Operator'S Manual, Page: 107 / 116

3 - 33 3 - 33
H7 - L
IFT THE OVERHEAD GUARD OR THE CABIN IN
THE EVENT OF AN HYDRAULIC FAILURE IN THE
LIFTING SYSTEM
- Tilt the mast backwards to the maximum.
- Unlock the overhead guard or the cabin with the lever 1 (Fig. H7/1) into
position A.
- With the cabin model, close the doors.
- Remove the screws 2 (Fig. H7/2) from the roof.
- Pass a sling around the upper belt of the mobile column (Fig. H7/3) and
fasten the sling ends onto the roof with screws H, M 14 (Length 50 mm
minimum) (Fig. H7/3).
- Start the I.C. engine.
- Smoothly lift the mast so as to stretch the sling.
- Slowly tilt the mast forwards until you can fit the safety stay 3 (Fig. H7/4)
onto its stop 4 (Fig. H7/4).
- Lower the mast so as to release and remove the sling and the screws.
- Reinstall and tighten the screws 2 (Fig. H7/2).
H7/2
H7/3
H7/1
A
1
H7/4
3
4
2
2