Manitou MHT 10180 LT-E3, Operator'S Manual

Page: 95 / 223

3-15
A7 - LONGITUDINAL STABILITY LIMITER AND WARNING DEVICE
CHECK
On this system, the presence of an alarm is indicated by the word flashing on the load display.
The code must be read as follows: the light flashes rapidly three times to indicate the beginning and end of the error code. After flashing
rapidly thrice, it flashes slowly twice, the first corresponds to tenths while the second corresponds to units.
For example, the sequence:
three rapid flashes – three slow flashes – three slow flashes – three rapid flashes corresponds to alarm
33
Alarm code Description
11 Error in CRC control of calibration data
12 Error in CRC control of calibration data
13 Error in CRC control of calibration data
14 Error in CRC control of calibration data
15 Error in CRC control of calibration data
16 Error in CRC control of calibration data
21 Boom closed consistency error
22 Difference in reading between two angles excessively high
23 Angle B reading error
24 Angle A reading error
25 Error on ROLLER 1 joystick
26 Error on ROLLER 2 joystick
27 Continuous optional potentiometer error
31 Reading error on cell 1
32 Reading error on cell 2
33 Difference between reading of two cells excessively high
34 Cell 1 error
35 Cell 2 error
36 Cell error
37 Control panel error
41 Extension solenoid valve error
42 Retraction solenoid valve error
43 Optional 1 solenoid valve error
44 Optional 2 solenoid valve error
45 Lift solenoid valve error
46 Descent solenoid valve error
47 Forks solenoid valve error
48 Forks solenoid valve error
51 Parking brake error
52 Movements stop main solenoid valve error
53 Forwards OUT error
54 Reverse OUT error
55 Slewing stop solenoid valve error
56 RH levelling solenoid valve error
57 LH levelling solenoid valve error
58 Transfer movement enable output reading error
59 Deflection in neutral output error
80 Control unit error
81 Control unit error
82 Control unit error
83 Cell 1 error
84 Cell 2 error
85 Angle 1 sensor error
86 Angle 2 sensor error
87 Basket PB panel movements selector error
88 Basket PB panel error
89 Tout_Radio error