Manitou MHT 10180 LT-E3, Operator'S Manual

Page: 62 / 223

2-30
E - TESTING OF THE LONGITUDINAL STABILITY LIMITER AND WARNING DEVICE
- Short press the button at any time to check the correct operation of the longitudinal stability limiter and warning device.
• Correct operation: All the leds light for two seconds and an audible beep is sounded.
NOTE: This test does not check the proper adjustment of the device that must be inspected daily or after every 10 hours of service (see:
3 - MAINTENANCE: A - DAILY OR EVERY 10 HOURS SERVICE).
F - FAULT INDICATOR LAMP
A permanently lit fault indicator lamp F, together with a combination of illuminated leds, indicates a
major fault liable to affect the safety of the lift truck. Refer to your agent or dealer.
- The fault indicator lamp plus leds A1 and A7 lighting alternately with A4 and A8 indicates
a defective link in the operation of the longitudinal stability limiter and warning device.
- The fault indicator lamp plus continuously lit leds A7 and A8 indicate a faulty box.
G - STRAIN GAUGE
Disassembly or calibration of the strain gauge is prohibited, this must only be done by specially trained
personnel, consult your dealer.
A8
A7
A4
A1
F
G