Manitou 6-E3 Series, Operator'S Manual

Page: 90 / 194

2-58
4 - LONGITUDINAL STABILITY LIMITER AND WARNING DEVICE
This device warns the operator of the lift truck’s longitudinal stability limits. However, lateral
stability can reduce the load char t in the upper par t, and this reduction is not detected by the
device.
According to the type of work required, the longitudinal stability limiter and warning device allows
the operator to operate the lift truck in complete safety.
The operator must respect the lift truck’s load chart, and the operating mode according to the attachment.
A - “HANDLING” MODE
Use on forks (TFF, PFB, TDL), and adjustable accessories
on forks (BB, GL).
- By default, the device is in “HANDLING” MODE when
the lift truck is star ted-up, except if the “SUSPENDED
LOAD” MODE has been selected before shutting-down
the engine.
A1 - A2 - A3: There is a significant reser ve of
longitudinal stability.
A4 - A5: The lift truck is nearing the limit of
longitudinal stability. The alarm sounds
simultaneously with a ver y slow
intermittent sound. Move with care.
A6: The lift truck is near at the limit of longitudinal
stability. The alarm sounds with a slow
intermittent sound. Move with care.
A7: The lift truck is ver y near at the limit of longitudinal stability. The alarm sounds with a fast intermittent sound.
Move with extreme care.
A8: The lift truck is at the authorized limit of longitudinal stability. The alarm sounds with a ver y fast intermittent sound. All
“AGGRAVATING” hydraulic movements are cut-off. The hydraulic movement may automatically slow before cut-off. Only
make de-aggravating hydraulic movements in the following order: retract and raise the jib.
NOTE: When the jib is retracted, the function for cutting-off “AGGRAVATING” hydraulic movements is disconnected.
B - “BUCKET” MODE
Use with a bucket (CB, CBA, CBC, CBG, CBR, CBM,
FFGR).
- Place the lift truck in the transpor t position.
- Press the button for 2 seconds, “BUCKET”
MODE is confirmed by an audible beep and the lighting
of the lamp.
- Return to “HANDLING” MODE by pressing the button
, or loss of driver presence for a few seconds,
or shutting down the engine.
A1 - A2 - A3: There is a significant reser ve of
longitudinal stability.
A4 - A5: The lift truck is approaching the limit of
longitudinal stability, move with care.
A6: The lift truck is approaching the limit of longitudinal stability. An audible beep is sounded. Move with care.
A7: The lift truck is ver y close to the limit of longitudinal stability. Move with extreme care.
A8: The lift truck is at the authorised limit of longitudinal stability.
All hydraulic movements remain available, ONLY PERFORM DE-AGGRAVATING HYDRAULIC MOVEMENTS IN THE FOLLOWING ORDER: RETRACT
AND RAISE THE JIB.
NOTE: According to the version, the jib lowering and extension movements may be cut-off and preceded by an automatic slowing of
hydraulic movements. In this case, when the jib is retracted, the function for cutting-off “AGGRAVATING” hydraulic movements
is disconnected.
A8
A7
A6
A5
A4
A3
A2
A1
N°297733
STANDARD
MODE
kg
X X
kg
X X
Kg
Kg
Kg
Kg
kg
X X X X X X X X X X X X X X
N°297733
STANDARD
MODE
kg
X X
kg
X X
STANDARD
MODE
kg
X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X