Manitou 6-E3 Series, Operator'S Manual

Page: 157 / 194

3-33
D6 - CLEANFIX COMPRESSOR FILTER (OPTION)
CHANGE
- Open the I.C. engine bonnet.
- Remove compressor securing nut 1 (fig. D6/1).
- Remove clip 2 (fig. D6/2).
- Replace filter 3 (fig. D6/2) with a new one (see: 3 - MAINTENANCE: FILTERS CARTRIDGES
AND BELTS) and correctly refit clip 2 (fig. D6/2).
- Refit the compressor securing nut.
D7 - GEAR BOX OIL FILTER
CHANGE
- Remove the cover plate 1 (fig. D7/1).
- Unscrew and discard gear box oil filter 2 (fig. D7/2).
- Carefully clean the filter head with a clean, lint-free cloth.
- Slightly lubricate the new seal and fit the seal on the filter.
- Fill up the new gear box oil filter (see: 3 - MAINTENANCE: FILTERS CARTRIDGES AND
BELTS) with oil (see: 3 - MAINTENANCE: LUBRICANTS AND FUEL).
- Refit the filter, making sure that the seal is correctly positioned and tightened.
Tighten the gear box oil filter by hand pressure only and lock the filter in place by a quarter turn.
- Put back the cover plate 1 (fig. D7/1).
D7/2
2
D7/1
1
D6/1
1
D6/2
3
2