Manitou 200 ATJ, Operator'S Manual

Page: 107 / 138

3 - 17
C13 - T
IGHTENING AXLE ASSEMBLY MOUNTING SCREWS ON THE FRAME
CHECK
- The bolts must be checked for tightness at the latest after 50 hours of operation. You must then repeat this check after
every 250 hours of operation.
- The tightening torque is 28.5 daN.m ± 10%
- 1 daN = 1 Kg.
C14 - A
RM POSITION SENSORS
CHECK
- For this operation, fold the arms into transport position
The 4 safety sensors must be switched on :
- 2 sensors on the arms
- 2 sensors on the telescope.
- Perform one travel operation at transport speed
- Raise the arms or extend the telescope
- Move forwards
- The platform must change to working speed.
In the event of dysfunction, forbid use the platform. Consult your dealer.
C15 - S
LOPE SENSOR
CHECK
Pour cette opération, déplier les bras.
- Incliner manuellement le dévers (voir : 2 - DESCRIPTION : SPECIFICATIONS).
- Les mouvements de sortie télescope, élévation des bras doivent être bloqués (le voyant de dévers est allumé dans le
panier, le vibreur sonore est activé par intermittence dans le panier).
In the event of dysfunction, forbid use the platform. Consult your dealer.
C16 - O
VERLOAD SENSOR
CHECK
For this operation, extend the arms.
- Position the platform on a steeper slope than is authorised (see : 2 - DESCRIPTION : SPECIFICATIONS).
- Movements to extend the telescope and raise the arms must be locked (the slope signal light is on in the basket, the
buzzer sounding intermittently in the basket).
In the event of dysfunction, forbid use the platform. Consult your dealer.
C17 - M
ACHINE STICKERS
CHECK
(C
ONSULT YOUR DEALER
)