Manitou 200 ATJ, Operator'S Manual

Page: 53 / 138

2 - 25
14
15 - B
LOCKING THE TURRET FROM ROTATING
- This pin must be used when the platform is being transported by truck or
some other means of transport (Train, etc...), to stop the turret from rotating.
- Remove the “clip”, and swiwel the pin to the left.
- Push the pin into the hole in the turret.
- Pivoter la broche vers la droite, engager le verrou dans l’ouverture.
- Verrouiller sa position en remettant la goupille.
Do not forget to remove it when using the platform.
16 - R
EVOLVING LIGHT
- The revolving light illuminates automaticelly when the platform is travelling
or making a movement (raising, rotating, etc.).
17 - T
ILT SENSOR
- This sensor signals the buzzer 41 when the platform is at the maximum
authorised tilt. The buzzer sounds intermittently (see chapter on : “SAFETY
SYSTEMS”).
15
17