Manitou 160 ATJ PLUS Euro 3, Instruction Manual

Page: 145 / 146

4-3
FUSES
D
ESCRIPTION OF THE FUSES AND THEIR REPLACEMENT
The fuses are located in the connection box (Fig. A1) fixed to the turret inside the
base control box.
Switched off
To access the fuses, open the cabinet door 1 (Fig. A2) and remove the hatch 2
(Fig. A2).
Unlock the two toggle clips 1 (Fig. A1).
Release the guard 3 (Fig. A2) upwards.
Examine the defective fuses (Fig. A3 - A4 - A5):
F1: Emergency pump power supply 7,5 Amps
F2: Base power supply 20 Amps
F3: Base power supply 20 Amps
F4: Basket power supply 20 Amps
F5: “Plus” after ignition power supply 5 Amps
F6: BRC box power supply 30 Amps
F7: Preheating power supply 60 Amps
F8: Emergency pump power supply (power) 250 Amps
When one of the fuses is blown, one of the four LEDs lights up (Fig. A3):
- Fuse status LED, emergency pump 1
- Status of one of the fuses, base power supply 2
- Fuse status LED, basket power supply 3
- Fuse status LED, “Plus” after ignition 4
A5
A4
A2
A1
A3
1
1
1
2
3
F7
F6
1 2 3 4
F1 F2 F3 F4 F5
F8
547408 EN (15/05/2012)