Manitou 160 ATJ PLUS Euro 3, Instruction Manual

Page: 140 / 146

3-40
G4 -
LIFTING PLATFORM ON A TRUCK BED
TRANSPORT
- See Section 2: LOADING / UNLOADING THE LIFTING PLATFORM.
G5 -
FREEWHEELING (160 ATJ PLUS EURO 3)
ACTIVE
In the event that the lifting platform must be towed, follow the instructions below.
The lifting platform may only be towed a short distance and necessarily
by a vehicle with significant braking power in order to be able to hold it
and with a tow bar fitted between the two vehicles.
1 - Wedging the lifting platform in place.
2 - Hydrostatic declutching.
Warning: Take the necessary precautions before conducting this
operation because the machine will no longer have any brakes.
- Lift the bonnet.
- Screw the HP restrictors 1 (Fig. G5/1) on the hydrostatic pump down to their
sticking point + 1 turn and a half (No. 13 spanner and No. 6 hex spanner).
3 - Mechanical declutching on the rear axle
- Unscrew bolt 1 (Fig. G5/2) without removing it.
- Remove cotter pin 2 (Fig. G5/2).
- Screw down bolt 1 (Fig. G5/2).
- Unscrew bolt 1 (Fig. G5/3) without removing it.
- Remove cotter pin 2 (Fig. G5/3).
- Screw down bolt 1 (Fig. G5/3).
Warning: after this operation, remember to remove the mechanical
brake release.
G5/1
G5/2
G5/3
1
1
1
2
1
2
547408 EN (15/05/2012)